Rice Color Sorter

For rice processors who need to remove visible kernel defects and contrasting foreign material while keeping good-product loss under review.

RiceApplication

ChuteTypical platform

Sample-ledSelection method

Suitable product	Paddy, brown, polished or parboiled rice—subject to test
Common targets	Yellow, chalky, black-tip and damaged kernels
Throughput	Confirmed from product and sustained line requirement
Final configuration	Selected after sample and site-condition review

Actual performance depends on defect contrast, incoming variation, feed rate, recipe and pass count.

Request a Test Plan Review Selection Inputs

See how the sorting decision is made

Representative rice input sample with dark kernels and foreign material before color sorting

Representative sample test

Run the normal product variation and record the feed condition, settings and output streams.

Accepted clean white rice stream after color sorting review

Accepted stream

Check residual target defects in the good product.

Rice reject stream review showing moldy grains, foreign plant matter, stones, grit and husk fragments

Reject and overflow streams

Review removed defects, saleable product carryover and any overflow that needs another pass.

Selection inputs and test outputs

Decision area	Information needed from your plant	What the test or engineering review confirms
Rice product	Variety, milling stage, moisture and normal variation	Presentation and recipe range
Target defects	Defect samples and accepted-product requirement	Visible separation boundary
Throughput	Sustained line requirement, not only a short peak	Recommended machine size and pass count
Yield priority	Acceptable good-product carryover	Balance between removal and yield retention
Utilities	Power, compressed air and dust-control conditions	Installation and auxiliary equipment requirements
Handover	Operators, shifts, varieties and service location	Training, recipes and spare-parts plan

Detailed model specifications should be confirmed against the current quotation file before ordering.

What can be tested in your rice

Rice sample with yellow and discolored kernels for color sorting test review

Yellow and fermented kernels

Evaluate the visible color difference against the accepted rice stream.

Comparison of translucent rice grains and white belly chalky rice grains

Chalky and off-white kernels

Adjust the threshold while reviewing both product grade and yield retention.

Contrasting foreign material

Confirm whether stones, glass or plastic differ visibly from the rice in the sample.

Evidence that belongs with the recommendation

Feed: starting defect profile and material condition · Accept: residual target defects · Reject: removed defects and good-product carryover · Overflow: material that needs another pass or setting review · Conditions: feed rate, recipe and pass count.

Request a rice sorting recommendation

Share your rice product, target defects and throughput. The material field is already selected for this page.

We will use the details to prepare the next technical questions and a sample test plan.

Tell us about your sorting project

Share the material you process, the visible defects you need to remove and your target throughput. If you can send a representative sample, we can plan the selection around real test conditions.